Fixed typo: milimeter -> millimeter

prusa3d · muesli · Mar 14, 2025 · Mar 14, 2025 · 47d1dee12d90a9944c88a566305f4699cdbdda22
commit 47d1dee12d90a9944c88a566305f4699cdbdda22
diff --git a/resources/localization/PrusaSlicer.pot b/resources/localization/PrusaSlicer.pot
@@ -4647,7 +4647,7 @@ msgstr ""
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 

diff --git a/resources/localization/be/PrusaSlicer.mo b/resources/localization/be/PrusaSlicer.mo
diff --git a/resources/localization/be/PrusaSlicer_be.po b/resources/localization/be/PrusaSlicer_be.po
@@ -5462,7 +5462,7 @@ msgstr "Аб'ёмы прадзьмуху - табліца"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "Табліца апісвае аб'ёмы (у кубічных міліметрах), якія неабходныя для "

diff --git a/resources/localization/ca/PrusaSlicer.mo b/resources/localization/ca/PrusaSlicer.mo
diff --git a/resources/localization/ca/PrusaSlicer_ca.po b/resources/localization/ca/PrusaSlicer_ca.po
@@ -5429,7 +5429,7 @@ msgstr "Volums de purga - matriu"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "Aquesta matriu descriu els volums (en mil·límetres cúbics) necessaris per "

diff --git a/resources/localization/de/PrusaSlicer.mo b/resources/localization/de/PrusaSlicer.mo
diff --git a/resources/localization/de/PrusaSlicer_de.po b/resources/localization/de/PrusaSlicer_de.po
@@ -14590,7 +14590,7 @@ msgstr "Reinigungsvolumen - Matrix"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "Diese Matrix beschreibt die Volumina (in Kubikmillimetern), die benötigt "

diff --git a/resources/localization/en/PrusaSlicer.mo b/resources/localization/en/PrusaSlicer.mo
diff --git a/resources/localization/en/PrusaSlicer_en.po b/resources/localization/en/PrusaSlicer_en.po
@@ -4686,7 +4686,7 @@ msgstr ""
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "This matrix describes volumes (in cubic millimetres) required to purge the "

diff --git a/resources/localization/es/PrusaSlicer.mo b/resources/localization/es/PrusaSlicer.mo
diff --git a/resources/localization/es/PrusaSlicer_es.po b/resources/localization/es/PrusaSlicer_es.po
@@ -14502,7 +14502,7 @@ msgstr "Volúmenes de purga - matriz"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "Esta matriz detalla los volúmenes (en milímetros cúbicos) necesarios para "

diff --git a/resources/localization/fi/PrusaSlicer_fi.po b/resources/localization/fi/PrusaSlicer_fi.po
@@ -4672,7 +4672,7 @@ msgstr ""
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 

diff --git a/resources/localization/fr/PrusaSlicer.mo b/resources/localization/fr/PrusaSlicer.mo
diff --git a/resources/localization/fr/PrusaSlicer_fr.po b/resources/localization/fr/PrusaSlicer_fr.po
@@ -14627,7 +14627,7 @@ msgstr "Volumes de purge - matrice"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "Cette matrice décrit les volumes (en millimètres cube) nécessaires pour "

diff --git a/resources/localization/hu/PrusaSlicer.mo b/resources/localization/hu/PrusaSlicer.mo
diff --git a/resources/localization/hu/PrusaSlicer_hu.po b/resources/localization/hu/PrusaSlicer_hu.po
@@ -5277,7 +5277,7 @@ msgstr "Öblítési mennyiségek - mátrix"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "Ez a mátrix bármely adott szerszámpár esetében leírja az új filament "

diff --git a/resources/localization/it/PrusaSlicer.mo b/resources/localization/it/PrusaSlicer.mo
diff --git a/resources/localization/it/PrusaSlicer_it.po b/resources/localization/it/PrusaSlicer_it.po
@@ -14532,7 +14532,7 @@ msgstr "Volumi di spurgo - matrice"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "Questa matrice descrive il volume (in millimetri cubici) necessario per "

diff --git a/resources/localization/ja/PrusaSlicer.mo b/resources/localization/ja/PrusaSlicer.mo
diff --git a/resources/localization/ja/PrusaSlicer_ja.po b/resources/localization/ja/PrusaSlicer_ja.po
@@ -14173,7 +14173,7 @@ msgstr "パージする量−行列"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "この行列は、任意のツールチェンジ間においてワイプタワーの新しいフィラメントを"

diff --git a/resources/localization/ko/PrusaSlicer.mo b/resources/localization/ko/PrusaSlicer.mo
diff --git a/resources/localization/ko/PrusaSlicer_ko_KR.po b/resources/localization/ko/PrusaSlicer_ko_KR.po
@@ -4976,7 +4976,7 @@ msgstr "볼륨 삭제 - 행렬"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "이 매트릭스는 지정 된 도구 쌍에 대해 와이퍼 타워의 새필라멘트를 제거 하는 데 "

diff --git a/resources/localization/ko_KR/PrusaSlicer.mo b/resources/localization/ko_KR/PrusaSlicer.mo
diff --git a/resources/localization/ko_KR/PrusaSlicer_ko.po b/resources/localization/ko_KR/PrusaSlicer_ko.po
@@ -5016,7 +5016,7 @@ msgstr "볼륨 삭제 - 행렬"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "이 매트릭스는 지정 된 도구 쌍에 대해 와이퍼 타워의 새필라멘트를 제거 하는 데 "

diff --git a/resources/localization/ko_KR/PrusaSlicer_ko_KR.mo b/resources/localization/ko_KR/PrusaSlicer_ko_KR.mo
diff --git a/resources/localization/ko_KR/PrusaSlicer_ko_KR.po b/resources/localization/ko_KR/PrusaSlicer_ko_KR.po
@@ -5016,7 +5016,7 @@ msgstr "볼륨 삭제 - 행렬"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "이 매트릭스는 지정 된 도구 쌍에 대해 와이퍼 타워의 새필라멘트를 제거 하는 데 "

diff --git a/resources/localization/nl/PrusaSlicer.mo b/resources/localization/nl/PrusaSlicer.mo
diff --git a/resources/localization/nl/PrusaSlicer_nl.po b/resources/localization/nl/PrusaSlicer_nl.po
@@ -5231,7 +5231,7 @@ msgstr "Afveegvolume - matrix"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "Deze matrix beschrijft volume (in mm³) dat is vereist om nieuw filament af "

diff --git a/resources/localization/pt_BR/PrusaSlicer.mo b/resources/localization/pt_BR/PrusaSlicer.mo
diff --git a/resources/localization/pt_BR/PrusaSlicer_pt_BR.po b/resources/localization/pt_BR/PrusaSlicer_pt_BR.po
@@ -5293,7 +5293,7 @@ msgstr "Volumes de purga-matriz"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "Esta matriz descreve volumes (em milimetros cúbicos) necessários para limpar "

diff --git a/resources/localization/ru/PrusaSlicer.mo b/resources/localization/ru/PrusaSlicer.mo
diff --git a/resources/localization/ru/PrusaSlicer_ru.po b/resources/localization/ru/PrusaSlicer_ru.po
@@ -5691,7 +5691,7 @@ msgstr "Таблица очищающих объёмов"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "Эта таблица описывает объёмы (в кубических миллиметрах), необходимые для "

diff --git a/resources/localization/sl/PrusaSlicer.po b/resources/localization/sl/PrusaSlicer.po
@@ -4679,7 +4679,7 @@ msgstr ""
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 

diff --git a/resources/localization/uk/PrusaSlicer.mo b/resources/localization/uk/PrusaSlicer.mo
diff --git a/resources/localization/uk/PrusaSlicer_uk.po b/resources/localization/uk/PrusaSlicer_uk.po
@@ -5142,7 +5142,7 @@ msgstr "Таблиця обсягів очищення"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "Ця матриця описує обсяги (у кубічних міліметрах), необхідні для витирання "

diff --git a/resources/localization/zh_CN/PrusaSlicer.mo b/resources/localization/zh_CN/PrusaSlicer.mo
diff --git a/resources/localization/zh_CN/PrusaSlicer_zh_CN.po b/resources/localization/zh_CN/PrusaSlicer_zh_CN.po
@@ -4968,7 +4968,7 @@ msgstr "清除量-矩阵"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "此矩阵描述清除擦料塔上任何给定工具对的新耗材所需的体积（以立方米为单位）。"

diff --git a/resources/localization/zh_TW/PrusaSlicer.mo b/resources/localization/zh_TW/PrusaSlicer.mo
diff --git a/resources/localization/zh_TW/PrusaSlicer_zh_TW.po b/resources/localization/zh_TW/PrusaSlicer_zh_TW.po
@@ -4961,7 +4961,7 @@ msgstr "清潔量 - 矩陣模式"
 
 #: src/libslic3r/PrintConfig.cpp:3694
 msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
+"This matrix describes volumes (in cubic millimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 "這個矩陣描述了以任何指定的工具於新線材在擦拭塔上清潔時所需耗費的體積（以立方"

diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini
@@ -33457,7 +33457,7 @@ end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.
 extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259
 nozzle_diameter = 0.4,0.4,0.4,0.4
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\n{endif}\nG92 E0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament millimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\n{endif}\nG92 E0
 default_print_profile = 0.15mm OPTIMAL
 
 # XXXXXXXXXXXXXXXXX

diff --git a/src/libslic3r/Emboss.hpp b/src/libslic3r/Emboss.hpp
@@ -458,9 +458,9 @@ namespace Emboss
     /// Sample slice polygon by bounding boxes centers
     /// slice start point has shape_center_x coor
     /// </summary>
-    /// <param name="slice">Polygon and start point[Slic3r scaled milimeters]</param>
+    /// <param name="slice">Polygon and start point[Slic3r scaled millimeters]</param>
     /// <param name="bbs">Bounding boxes of letter on one line[in font scales]</param>
-    /// <param name="scale">Scale for bbs (after multiply bb is in milimeters)</param>
+    /// <param name="scale">Scale for bbs (after multiply bb is in millimeters)</param>
     /// <returns>Sampled polygon by bounding boxes</returns>
     PolygonPoints sample_slice(const TextLine &slice, const BoundingBoxes &bbs, double scale);
 

diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
@@ -3691,7 +3691,7 @@ void PrintConfigDef::init_fff_params()
 
     def = this->add("wiping_volumes_matrix", coFloats);
     def->label = L("Purging volumes - matrix");
-    def->tooltip = L("This matrix describes volumes (in cubic milimetres) required to purge the"
+    def->tooltip = L("This matrix describes volumes (in cubic millimetres) required to purge the"
                      " new filament on the wipe tower for any given pair of tools.");
     def->set_default_value(new ConfigOptionFloats {   0., 140., 140., 140., 140.,
                                                     140.,   0., 140., 140., 140.,

diff --git a/src/slic3r/GUI/Jobs/EmbossJob.cpp b/src/slic3r/GUI/Jobs/EmbossJob.cpp
@@ -224,7 +224,7 @@ void create_volume(TriangleMesh &&mesh, const ObjectID& object_id, const ModelVo
 /// Create projection for cut surface from mesh
 /// </summary>
 /// <param name="tr">Volume transformation in object</param>
-/// <param name="shape_scale">Convert shape to milimeters</param>
+/// <param name="shape_scale">Convert shape to millimeters</param>
 /// <param name="z_range">Bounding box 3d of model volume for projection ranges</param> 
 /// <returns>Orthogonal cut_projection</returns>
 OrthoProject create_projection_for_cut(Transform3d tr, double shape_scale, const std::pair<float, float> &z_range);

diff --git a/src/slic3r/Utils/EmbossStyleManager.cpp b/src/slic3r/Utils/EmbossStyleManager.cpp
@@ -408,7 +408,7 @@ void StyleManager::init_style_images(const Vec2i &max_size,
     auto mf = wxGetApp().mainframe;
     // dot per inch for monitor
     int dpi = get_dpi_for_window(mf);
-    // pixel per milimeter
+    // pixel per millimeter
     double ppm = dpi / ObjectManipulation::in_to_mm;
 
     auto &worker = wxGetApp().plater()->get_ui_job_worker();

diff --git a/src/slic3r/Utils/EmbossStyleManager.hpp b/src/slic3r/Utils/EmbossStyleManager.hpp
@@ -313,7 +313,7 @@ class StyleManager
         // place to store result in main thread in Finalize
         std::shared_ptr<StyleImages> result;
 
-        // pixel per milimeter (scaled DPI)
+        // pixel per millimeter (scaled DPI)
         double ppm;
     };
     std::shared_ptr<StyleImagesData::StyleImages> m_temp_style_images = nullptr;