error in bed temperature when first layer is set to different temperature

[emmanuelcohenlaroque]

Version

1.34.1.24

Operating system type + version

What OS are you using, and state any version #s
OS X El Capitan

When setting a different bed temperature for first and other layers, the first layer is not set to first temperature but to other layers' one.

[bubnikv]

Would you please provide a config.ini file (go to menu file->export config), an STL (or rather an AMF file in case of a multi material print) and possibly the generated G-code? Thank you

[emmanuelcohenlaroque]

here you are: 1st layer set at 75C, next layers at 80C. In gcode, bed temperature is set to 80C only. thanks

…

On 05 Jun 2017, at 18:00, bubnikv ***@***.***> wrote: Would you please provide a config.ini file (go to menu file->export config), an STL (or rather an AMF file in case of a multi material print) and possibly the generated G-code? Thank you — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#328 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AJgAASLzrH9NI8OcuTL_zYnGCY6Vf1Xbks5sBCYegaJpZM4NwGe5>.

[bubnikv]

You did not attach any file.

[emmanuelcohenlaroque]

Resent - files were attached (total 1.8MB). Cheers here you are: 1st layer set at 75C, next layers at 80C. In gcode, bed temperature is set to 80C only. thanks

…

On 05 Jun 2017, at 18:00, bubnikv ***@***.*** ***@***.***>> wrote: Would you please provide a config.ini file (go to menu file->export config), an STL (or rather an AMF file in case of a multi material print) and possibly the generated G-code? Thank you — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#328 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AJgAASLzrH9NI8OcuTL_zYnGCY6Vf1Xbks5sBCYegaJpZM4NwGe5>.

[bubnikv]

There is nothing attached. Please zip all files into a single zip, it should go through.

[emmanuelcohenlaroque]

here are the files zipped. cheers

…

On 06 Jun 2017, at 09:53, bubnikv ***@***.***> wrote: There is nothing attached. Please zip all files into a single zip, it should go through. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#328 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AJgAATxD-uveCPkU3QYqiALQj_PqbBKLks5sBQWKgaJpZM4NwGe5>.

[bubnikv]

Still nothing attached.

[emmanuelcohenlaroque]

i am using Apple Mail - is that a problem?

…

On 06 Jun 2017, at 10:16, bubnikv ***@***.***> wrote: Still nothing attached. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#328 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AJgAAbwQhJbVe6GaPRZyBuizoAOCQ4vGks5sBQrCgaJpZM4NwGe5>.

[emmanuelcohenlaroque]

trying again using webmail this time... Le 2017-06-06 10:16, bubnikv a écrit :

…

Still nothing attached. -- You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub [1], or mute the thread [2]. * Links: ------ [1] #328 (comment) [2] https://github.com/notifications/unsubscribe-auth/AJgAAbwQhJbVe6GaPRZyBuizoAOCQ4vGks5sBQrCgaJpZM4NwGe5

[bubnikv]

Still nothing. I recommend to use the github web gui
#328

[bubnikv]

Just click on the #328

[bubnikv]

Reverted the "set_and_wait_temperatures" change introduced in 1.35.1, as it was not in line with the latest @alexrj Slic3r and it caused confusion.

Please retest with the upcoming Slic3r 1.35.3. If that does not solve your issue, please reopen this issue.