[Bug]: wrong daily production value

[MariuszWoszczynski]

Describe the issue

I have been using this integration for some time and everything was ok. After adding the energy storage I noticed that there is a problem with the counting of daily yield.
The counting is probably done on the basis of active power (this method with the PV installation itself is ok), but after installing the energy storage the active power is no longer just the production from the sun. Therefore, the ence of daily yield is wrong (e.g., it increases at night when there is no sun and the consumers use energy from the storage).
Shouldn't the ence of daily production be based on the DC input power of the inverter?

Describe your Huawei Solar Setup

Inverter Type:
Inverter Firmware version:
sDongle present: Yes / No
sDongle Type: sDongleA-05 (WiFi / Ethernet) / SDongleA-03 (4G)
sDongle Connectivitiy: WiFi / Ethernet / 4G
sDongle Firmware:
Power meter present: three phase / single phase / no
Optimizers Present: Yes / No
Battery: LUNA2000-SO xxkWh / LUNA2000-S1 xxkWh (Released 2024) / LG RESU xxkWh / None
Battery Firmware version:
Huawei Solar integration version:

How do you connect to the inverter?

Over serial, with a serial-to-WiFi stick

Upload your Diagnostics File

Drag & Drop your Diagnostics File here.

Upload your relevant debug logs

Dont have

Please confirm the following:

• I'm running the latest release of Home Assistant.
• I'm running the latest release of this integration.
• I did not find an existing issue describing this problem.
• I did upload the diagnostics-file that I could retrieve from the 'Devices & Services Page'
• I did upload the relevant debug logs (via 'Enable Debug Logging'-feature or by manually configuring HA logging)