Identify this controller

[Twilliamson3]

Checklist

• I made sure that there are no existing issues or discussions - open issues,closed issues,open discussion, closed discussion - which may answer my question or that I could contribute my information to.
• I have read the Known Issues Wiki Page and my question / issue is not listed.
• I have provided the version of the software and the operating system in my post.
• If I have an issue with genmon not communicating with the controller, I have read and followed the serial troubleshooting guide.
• I have included the generator make and model in my submission.

Version

No response

Have you submitted your log files from the About page? Note that outbound email must be working for logs to be submitted.

I have not submitted logs

What is/are your question(s)?

Can you identify this Briggs & Stratton controller? I have read a post talking about it working with genmon but didn't really have a complete response as to if it actually worked. #1160

Additional information

No response

[jgyates]

Genmon supports the Briggs and Stratton GC-1030 Series Controller. The controller in the picture above is not this controller. The video link below shows the supported controller.

https://www.youtube.com/watch?v=QFlJR5U6lzo&ab_channel=genmonBriggs

Regarding identifying your conroller, this appears to be one like this: https://yakimagenerator.com/product/briggs-control-panel-315423gs/

I would look at your generator enclosure, typically there is a metal plate that has the serial number, model number, rated output ,etc. Once you have the model number then that info, along with the controller would determine if genmon could add support for this generator in the future.